Setup Summary
- Turn on Both Power Packs
- Check settings on power pack is exactly as shown in picture below
- Close Skylight doors and room door
- Turn Off all other lighting in the room
Important Notes
- Make sure all other lighting is off
- Make sure there is no natural lighting and the door is closed
- Do change the flash pack intensity setting
Testing Strobe Lights
- Turn on flash on the hand-held camera (Nikon D300S)
- Put flash on highest mode as shown in picture below
- Point flash to ceiling
- Look up above at strobe lights
- Click test on hand-held flash and make sure all strobe lights flash